FullScreenClock

A clock for exams and classrooms

One clock at the front of the room that every student reads the same way removes a whole category of exam-day questions. Here is a setup that takes two minutes and does not fail halfway through.

Choose the right display

For an exam, use the big clock or the digital clock. Digital time matches the start and finish times written on the board, so nobody has to convert. Show hours and minutes; turn seconds on only if you will start and stop to the second.

For a timed section, use the timer. Set the length, press Start, and the screen turns red when time is up. If your exam rules require silence, turn off the sound in Settings beforehand.

For teaching the time, use the analog clock with numerals on, then off.

Set up before students arrive

  1. Open the clock on the computer connected to the projector or display.
  2. Check the time against a second source. On the clock with seconds page we compare your computer's clock with our server and tell you if it is off.
  3. Choose 12 or 24 hour time to match your exam paper. Press H to switch.
  4. Press F for full screen. The controls and the pointer disappear after three seconds.
  5. Walk to the back of the room and make sure you can read it. If you cannot, hide the date or the seconds to make the digits larger.

Make sure it stays on

The usual failure is the computer going to sleep or the screen saver starting forty minutes in.

Our guide to stopping your screen from sleeping has the system settings for Windows, Mac and iPad.

If the internet goes down

The clock reads the time from the computer, not from the internet, and after the first visit the page is stored in the browser. It keeps running through a Wi-Fi outage, and reopens without a connection.

A note on fairness

Tell students at the start which clock is the official one. If the wall clock and the projected clock disagree by a minute, somebody will ask which counts.

Steps checked against the linked sources in November 2026. Menus change; if a step does not match your device, tell us.